3-8 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
3.2 Basic Configuration
3.2.1 Displaying System Information
You can identify the system by providing a descriptive name, location, and contact
information.
When displaying system information using the web interface or CLI, the following
parameters are displayed or can be configured:
■ Host Name – The name assigned to the switch.
■ Location – The system chassis location.
■ Contact – The administrator responsible for the system.
■ System Up Time – The length of time the management agent has been up.
■ System Description – The system hardware description assigned by the
manufacturer.
■ Serial Number
1
– The serial number of the main board.
■ System OID string
2
– The MIB II object ID for switch’s network management
subsystem.
■ MAC Address
3
– The physical layer address for the switch.
■ Web server
2
– The operational status of web (HTTP) management access on the
switch.
■ Web server port
2
– The TCP port number used by the web interface.
■ POST result
2
– The results of the switch power-on self-test.
3.2.1.1 Web Interface: Displaying and Specifying Identification
Details
1. Open the Switch Setup ⇒ System Identity window.
2. Specify the host name, location, and contact information for the system
administrator.
3. Click Save.
1. CLI:See“showversion”onpage 4-44
2. CLIonly
3. Web:See“SettingtheIPAddress”onpage 3-12