4-20 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
4.3.2 Flash/File Commands
These commands are used to manage the system code or configuration files.
4.3.2.1 copy
Use this command to move (upload/download) a code image or configuration file
between the switch's Flash memory and a TFTP server. When you save the system
code or configuration settings to a file on a TFTP server, that file can later be
downloaded to the switch to restore system operation. The success of the file
transfer depends on the accessibility of the TFTP server and the quality of the
network connection.
Console#quit
Press ENTER to start session
User Access Verification
Username:
Command Function ModePage
copy Copies a code image or a switch configuration to or from
Flash memory or a TFTP server
PE 4-20
delete Deletes a file or code image PE 4-22
dir Displays a list of files in Flash memory PE 4-23
whichboot Displays the files booted PE 4-25
boot system Specifies the file or image used to start up the system GC 4-26