Filter
Top Products
Chapter 4 Command-Line Reference 4-125
Default Setting
All frame types
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
When set to receive all frame types, any received frames that are untagged are
assigned to the default VLAN.
Example
The following example shows how to restrict the traffic received on SNP1 to
tagged frames:
4.3.12.6 switchport ingress-filtering
Use this command to enable ingress filtering for an interface. Use the no form to
restore the default.
Syntax
switchport ingress-filtering
no switchport ingress-filtering
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Console(config)#interface ethernet SNP1
Console(config-if)#switchport acceptable-frame-types tagged
Console(config-if)#