Filter
Top Products
3-108 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
3.4.3.1 Dynamically Configuring an Aggregated Link with LACP
Web Interface: Dynamic Aggregated Links (LACP)
1. Click Up Links/Down Links ⇒ Link Aggregation.
2. Locate the required port in the Link Aggregation table.
3. Click Enable LACP or Disable LACP.
Note – The action buttons take immediate effect. To avoid creating a loop in the
network, be sure you enable LACP before connecting the ports, and also disconnect
the ports before disabling LACP.
FIGURE 3-35 The Uplink ⇒ Link Aggregation Window