Filter
Top Products
Chapter 4 Command-Line Reference 4-43
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
■ For a description of the items shown by this command, refer to “Displaying
System Information” on page 3-8.
■ The POST results should all display PASS. If any POST test indicates FAIL,
contact your distributor for assistance.
Example
Console#show system
System description: Sun Fire B1600
System OID string: 1.3.6.1.4.1.42.2.24.1
System information
System Up time: 0 days, 0 hours, 55 minutes, and 54.91 seconds
System Name : [NONE]
System Location : [NONE]
System Contact : [NONE]
MAC address : 00-00-e8-00-00-01
Web server : enable
Web server port : 80
Web secure server : enable
Web secure server port : 443
POST result
--- Performing Power-On Self Tests (POST) ---
UART Loopback Test ..................... PASS
Timer Test ............................. PASS
DRAM Test .............................. PASS
I2C Initialization ..................... PASS
Runtime Image Check .................... PASS
PCI Device Check ....................... PASS
Switch Driver Initialization ........... PASS
------------------- DONE --------------------
Console#