4-56 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Command Usage
The first snmp-server community command you enter enables all versions of
SNMP (SNMP v1 and SNMP v2c). The no snmp-server community command
disables all versions of SNMP.
Example
4.3.5.2 snmp-server contact
Use this command to set the system contact string. Use the no form to remove the
system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string – The string that describes the system contact information.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#snmp-server community alpha rw
Console(config)#
Console(config)#snmp-server contact Paul
Console(config)#