Filter
Top Products
3-140 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
FIGURE 3-44 The Monitoring ⇒ Port Mirroring Window
3.5.1.2 Command-line Interface: Configuring Port Mirroring
Use the interface command to select the monitor port, then use the port
monitor command to specify the source port. Note that default mirroring under the
CLI is for both received and transmitted packets.
Console(config)#interface ethernet NETP7
Console(config-if)#port monitor ethernet NETP6
Console(config-if)#