Filter
Top Products
Chapter 3 General Management of the Switch 3-51
■ Add Tagged: The interface is a member of the VLAN. All packets transmitted
by the port on this VLAN will be tagged, that is, carry a tag and therefore carry
VLAN or COS information.
■ Add Untagged: The interface is a member of the VLAN. All packets
transmitted by the port will be untagged, that is, not carry a tag and therefore
not carry VLAN or COS information.
■ Add Forbidden: The interface is forbidden from automatically joining the
VLAN through GVRP. See “Automatic VLAN Registration” on page 3-40.
■ Remove: Removes the selected interface from the VLAN.
Web Interface: Adding Ports Manually to a VLAN
To add an interface to a VLAN:
1. Open Switch Config
⇒ VLANs.
2. Highlight a VLAN in the static list, and click Membership.
3. From the port membership page, select an interface from the All Ports list (port or
port-channel).
4. Click Add Tagged, Add Untagged, or Add Forbidden (to prevent this interface
from being added through GVRP).
To remove an interface from a VLAN:
1. Select an entry from the Membership Ports list.
2. Click Remove.