4-118 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
4.3.11.14 show spanning-tree
Use this command to show the configuration for the spanning tree.
Syntax
show spanning-tree [interface]
interface
■ ethernet port-name
port-name – down link: SNP0-15; up link: NETP0-7; mgt: NETMGT
■ port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
■ Use the show spanning-tree command with no parameters to display the
spanning tree configuration for the switch and for every interface in the tree.
■ Use the show spanning-tree interface command to display the spanning
tree configuration for an interface.
■ For a description of the items displayed under Spanning tree
information, see “Configuring Basic STA Settings” on page 3-70. For a
description of the items displayed for specific interfaces, see “Managing
Interfaces for Spanning Tree Algorithm” on page 3-125.