Filter
Top Products
4-122 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Syntax
vlan vlan-id [name vlan-name] media ethernet [state {active | suspend}]
no vlan vlan-id [name | state]
■ vlan-id – ID of configured VLAN. (Range: 1-4094, no leading zeroes)
■ name – Keyword to be followed by the VLAN name.
vlan-name – ASCII string from 1 to 15 characters.
■ media ethernet – Ethernet media type.
■ state – Keyword to be followed by the VLAN state.
■ active – VLAN is operational.
■ suspend – VLAN is suspended. Suspended VLANs do not pass packets.
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
■ no vlan vlan-id deletes the VLAN.
■ no vlan vlan-id name removes the VLAN name.
■ no vlan vlan-id state returns the VLAN to the default state (active).
■ VLAN 1 cannot be suspended, but any other VLAN can be suspended.
■ You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using VLAN ID 105 and name RD5. The
VLAN is activated by default.
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#