Filter
Top Products
Chapter 4 Command-Line Reference 4-11
4.2 Command Groups
The system commands can be broken down into the functional groups shown below.
TABLE 4-4 Command Groups
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
4-13
Flash/File Manages code image or switch configuration files 4-20
System Management Controls system logs, system passwords, user name, browser
management options, and a variety of other system
information
4-27
Authentication Configures authentication for logon access using local,
RADIUS, or TACACS methods
4-45
SNMP Activates authentication failure traps; configures community
access strings, and trap managers
4-54
Line
Sets connection options for the serial port and Telnet,
including
password checking, line password, and console
time-out
4-62
IP Configures the IP address and gateway for management
access, displays the default gateway, or pings a specified
device
4-69
Interface Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
4-83
Address Table Configures the address table for filtering specified addresses,
displaying current entries, clearing the table, or setting the
aging time
4-98
Port Security Configures secure addresses for a port 4-103
Spanning Tree Configures Spanning Tree settings for the switch 4-105
VLAN Configures VLAN settings, and defines port membership for
VLAN groups
4-120
GVRP and
Bridge Extension
Configures GVRP settings that permit automatic VLAN
learning; shows the configuration for bridge extension MIB
4-131
IGMP Snooping Configures IGMP multicast filtering, querier eligibility, query
parameters, and specifies ports attached to a multicast router
4-138