Chapter 4 Command-Line Reference 4-169
Syntax
lacp
no lacp
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet)
Command Usage
■ The ports on both ends of an aggregated link must be configured for full
duplex, either by forced mode or auto-negotiation.
■ An aggregated link formed with another switch using LACP will automatically
be assigned the next available port-channel ID.
■ If the target switch has also enabled LACP on the connected ports, the
aggregated link will be activated automatically.
■ If more than four ports attached to the same target switch have LACP enabled,
the additional ports are placed in standby mode, and are only enabled if one of
the active links fails.