B-12 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Advanced
Configuration
Data is invalid. General error.
User privileges are not enough to
perform this operation.
Privileges insufficient.
Class of Service
Basic Traffic
Prioritisation
Cos Value is out of range. CoS Value is out of range.
Data is invalid. General error.
Priority is out of range. Priority is out of range.
Queue weight must be in a order of
Q0<=Q1<=Q2<=Q3
Invalid Queue weight.
Traffic Class is out of range. Traffic Class is out of range.
User privileges are not enough to
perform this operation.
Privileges insufficient.
Layer 3/4
Traffic
Prioritisation
Cos Value is out of range. CoS Value is out of range.
Please select IP Precedence or DSCP
mode
Select one of these options when priority service is
enabled.
Traffic Class is out of range. Traffic Class is out of range.
User privileges are not enough to
perform this operation.
Privileges insufficient.
Address Tables Aging time is out of range. Maximum address aging time exceeded.
User privileges are not enough to
perform this operation.
Privileges insufficient.
Up Links, Down Links
Status Cannot set port capabilities. Incorrect speed/duplex mode for specified port.
Data is invalid. General error.
User privileges are not enough to
perform this operation.
Privileges insufficient.
Link
Aggregation
Cannot add aggregated link. The
specified aggregated link is full or data
is invalid.
The specified aggregated link is full or data is invalid.
Cannot create aggregated link. Maximum number of aggregated links has been
exceeded.
Cannot remove aggregated link. There is a problem with the aggregated link table.
Cannot remove member of aggregated
link. Data is invalid.
There is a problem with the aggregated link table.
TABLE B-4 Web Interface Error Messages (Continued)
Menu Message Description