4-74 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
4.3.7.4 ip default-gateway
Use this command to a establish a static route between the switch and management
stations that exist on another network segment. Use the no form to remove the static
route.
Syntax
ip default-gateway gateway
no ip default-gateway
gateway – The IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Command Usage
A gateway must be defined if the management station is located in a different IP
segment.
Example
The following example defines a default gateway for this device:
Related Commands
show ip redirects (4-75)
Console(config)#ip default-gateway 10.1.0.254
Console(config)#