Filter
Top Products
4-14 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
■ super is the default password required to change the command mode from
Normal Exec to Privileged Exec. (To set this password, see the enable
password command on page 4-30.)
■ The # character is appended to the end of the prompt to indicate that the
system is in privileged access mode.
Example
Related Commands
disable (4-14)
enable password (4-30)
4.3.1.2 disable
Use this command to return to Normal Exec mode from privileged mode. In normal
access mode, you can only display basic information on the switch's configuration or
Ethernet statistics. To gain access to all commands, you must use the privileged
mode. See “Understanding Command Modes” on page 4-7.
Default Setting
None
Console>enable
Password: privileged level password
Console#