Filter
Top Products
3-158 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
FIGURE 3-48 The Monitoring ⇒ Logs Window
3.5.4.2 Command-line Interface: Configuring Message Logs
This example enables logging, sets the recorded messages for Flash memory to
level 3 (that is “errors”), and then shows the log messages stored in Flash.
Console(config)#logging on
Console(config)#logging history flash 3
Console#show logging flash
Syslog logging: Enable
History logging in FLASH: level errors
[0] 0:0:5 1/1/1
"PRI_MGR_InitDefault function fails."
level: 3, module: 13, function: 0, and event no.: 0
Console#