Sunfire B1600 Switch User Manual


 
Chapter 4 Command-Line Reference 4-67
Syntax
password-thresh threshold
no password-thresh
threshold The number of allowed password attempts.
(Range: 1-120; 0: no threshold)
Default Setting
The default value is three attempts.
Command Mode
Line Configuration
Command Usage
When the login attempt threshold is reached on the console port, the system
interface becomes silent for a specified amount of time before allowing the next
login attempt. (Use the silent-time command to set this interval.) When this
threshold is reached for Telnet, the Telnet logon interface closes.
This command applies to both the local console and Telnet connections.
Example
To set the password threshold to five attempts, enter this command:
Related Commands
silent-time (4-67)
4.3.6.6 silent-time
Use this command to set the amount of time the management console is inaccessible
after the number of unsuccessful login attempts exceeds the threshold set by the
password-thresh command. Use the no form to remove the silent time value.
Console(config-line)#password-thresh 5
Console(config-line)#