Filter
Top Products
4-60 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Example
Related Commands
snmp-server host (4-57)
4.3.5.6 show snmp
Use this command to check the status of SNMP communications.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command provides information on the community access strings, counter
information for SNMP input and output protocol data units, and whether or not
SNMP logging has been enabled with the snmp-server enable traps
command.
Console(config)#snmp-server enable traps link-up-down
Console(config)#