Sunfire B1600 Switch User Manual


 
4-138 Sun Fire B1600 Blade System Chassis Switch Administration Guide June 2003
Example
4.3.14 IGMP Snooping Commands
This switch uses IGMP (Internet Group Management Protocol) to query for any
attached hosts that want to receive a specific multicast service. It identifies the ports
containing hosts requesting a service and sends data out to those ports only. It then
propagates the service request up to any neighboring multicast switch/router to
ensure that it continues to receive the multicast service.
Console#show bridge-ext
Max support vlan numbers: 255
Max support vlan ID: 4094
Extended multicast filtering services: No
Static entry individual port: Yes
VLAN learning: IVL
Configurable PVID tagging: Yes
Local VLAN capable: Yes
Traffic classes: Enabled
Global GVRP status: Enabled
GMRP: Disabled
Console#
TABLE 4-19 IGMP Snooping Commands
Command Function Mode Page
Basic IGMP Commands
ip igmp snooping Enables IGMP snooping GC 4-139
ip igmp snooping
vlan static
Adds an interface as a member of a multicast group GC 4-140
ip igmp snooping
version
Configures the IGMP version for snooping GC 4-141
show ip igmp
snooping
Shows the IGMP snooping configuration PE 4-142
show bridge
multicast
Shows the IGMP snooping MAC multicast list PE 4-143
IGMP Querier Commands
ip igmp snooping
querier
Allows this device to act as the querier for IGMP
snooping
GC 4-144
ip igmp snooping
query-count
Configures the query count GC 4-144