Filter
Top Products
Appendix B Troubleshooting B-9
B.5.4 Web Interface Errors
The error messages generated by this switch for the Web interface are listed in the
following table. Note that these messages are not written to the log file.
TABLE B-4 Web Interface Error Messages
Menu Message Description
Switch Setup
System Identity User privileges are not enough to
perform this operation.
Privileges insufficient.
Network
Identity
Current IP Address Mode is not
DHCP or BOOTP.
When restarting DHCP, the switch must be in DHCP
or BOOTP mode.
Data is invalid. General error.
Set DHCP Client-ID error. Failed to set DHCP client ID.
User privileges are not enough to
perform this operation.
Privileges insufficient.
Software Data is invalid. General error.
Please input a destination file. Input a destination file name to download or upload.
Please input a source file. Input a source file name to download or upload
Please input or select a destination
file.
Input or select a file name for downloading or
uploading.
Please select a file. Select a file to download or upload.
System will be restarted... System will be restarted.
User privileges are not enough to
perform this operation.
Privileges insufficient.
Switch Config
Security Cannot add user. User name is invalid or maximum number of users
has been exceeded.
Cannot set password for user. Password is invalid.
Cannot set user privilege. There is a problem with the user table.
Cannot set user status. There is a problem with the user table.
User does not exist. There is a problem with the user table.
Communication Community String cannot contain
spaces.
Community string cannot contain spaces.
Community table is full or data is
invalid.
Community table is full or data is invalid.