4-144 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
4.3.14.6 ip igmp snooping querier
Use this command to enable the switch as an IGMP snooping querier. Use the no
form to disable it.
Syntax
ip igmp snooping querier
no ip igmp snooping querier
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
If enabled, the switch will serve as querier if elected. The querier is responsible
for asking hosts if they want to receive multicast traffic.
Example
4.3.14.7 ip igmp snooping query-count
Use this command to configure the query count. Use the no form to restore the
default.
Syntax
ip igmp snooping query-count count
no ip igmp snooping query-count
Console(config)#ip igmp snooping querier
Console(config)#