Sunfire B1600 Switch User Manual


 
B-1
APPENDIX
B
Troubleshooting
If you are having problems connecting to the network, check your network cabling
to ensure that the device in question is properly connected to the network. Then see
“Diagnosing Switch Indicators” on page B-2 to verify that the corresponding port on
the switch is functioning properly.
If you are having problems connecting to the management interface, see the
troubleshooting chart under “Accessing the Management Interface” on page B-2.
This appendix contains the following sections:
Section B.1, “Diagnosing Switch Indicators” on page B-2
Section B.2, “Diagnosing Port Connections” on page B-2
Section B.3, “Accessing the Management Interface” on page B-2
Section B.4, “Using System Logs” on page B-4
Section B.5, “Error Messages” on page B-5