Chapter 1 Introduction 1-9
1.4 Switch Default Settings
TABLE 1-2 Switch Default Settings
Function Default
System Settings
• Web Mgt. Enabled
• Secure Web Mgt. Disabled
• BOOTP Enabled
• DHCP Enabled
• SNMP Communities public: Read Only
private: Read/Write
• SNMP Traps Authentication traps: enabled
Link up down events: enabled
• User Name admin (for console, Telnet, Web)
guest (for console, Telnet, Web)
• Password logon -
user admin, password admin
user guest, password guest
Change from Normal Exec to Privileged Exec: super
Serial Port Baud rate: 9600, Data bits: 8, Stop bits: 1, Parity: none
IP Settings Address: 0.0.0.0, Subnet mask: 255.0.0.0
Port Status
• Port Speed Port SNP0-15: 1000 Mbps
Port NETP0-7: 10/100/1000 Mbps, auto-negotiated
Port NETMGT: 10/100 Mbps, auto-negotiated
• Duplex Mode Port SNP0-15: full
Port NETP0-7, NETMGT: half- and full-duplex, auto-negotiated
• Flow Control Disabled
Port Priority Ingress priority: 0
Port Security Disabled
Spanning Tree Protocol Enabled, Default RSTP
(Defaults: All parameters based on IEEE 802.1w)