Filter
Top Products
4-132 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
4.3.13.1 switchport gvrp
Use this command to enable GVRP for a port. Use the no form to disable it.
Syntax
switchport gvrp
no switchport gvrp
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
4.3.13.2 show gvrp configuration
Use this command to show if GVRP is enabled or disabled.
Syntax
show gvrp configuration [interface]
interface
■ ethernet port-name
port-name – down link: SNP0-15; up link: NETP0-7; mgt: NETMGT
■ port-channel channel-id (Range: 1-6)
Console(config)#interface ethernet SNP1
Console(config-if)#switchport gvrp
Console(config-if)#