Filter
Top Products
3-50 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
3.3.1.4 Adding Static Members to VLANs
When adding static members to VLANs using the web interface or CLI, the
following parameters are displayed or can be configured:
■ Name – The name of the VLAN.
■ Up Time at Creation – The time the VLAN was created.
■ Status
10
– The method by which the VLAN was added to the switch.
■ Dynamic: Automatically learned through GVRP.
■ Static: Manually configured as a static entry.
■ All Ports – The port or port-channel identifier.
■ Membership Ports – The interfaces added to the selected VLAN as tagged or
untagged, or restricted from being automatically added through GVRP.
■ Membership Type – Specify VLAN membership by highlighting the required
interface, and clicking the appropriate Add button:
VLAN Type MIB-
II.dot1dBridge.
qBridgeMIB.
qBridgeMIBObjects
.
dot1qVlan.
dot1qVlanCurrentT
able.
dot1qVlanCurrentE
ntry.
dot1qVlanStatus
Read only other(1),
permanent(2),
dynamicGvrp(3)
VLAN Ports MIB-
II.dot1dBridge.
qBridgeMIB.
qBridgeMIBObjects
.
dot1qVlan.
dot1qVlanCurrentT
able.
dot1qVlanCurrentE
ntry.
dot1qVlanCurrent-
EgressPorts
Read only Octet string
(port list)
10.CLIonly.
TABLE 3-13
MIB Variables Associated With VLAN Configuration (Continued)
Field Name MIB Variable Access Value Range
Default
Value