Filter
Top Products
Chapter 4 Command-Line Reference 4-17
Example
In this example, the show history command lists the contents of the command
history buffer:
The ! command repeats commands from the Execution command history buffer
when you are in Normal Exec or Privileged Exec Mode, and commands from the
Configuration command history buffer when you are in any of the configuration
modes. In this example, the !2 command repeats the second command in the
Execution history buffer (config).
4.3.1.5 reload
Use this command to restart the system.
Note – When the system is restarted, it always runs the Power-On Self-Test. It also
retains all configuration information stored in non-volatile memory by the copy
running-config startup-config command.
Default Setting
None
Console#show history
Execution command history:
2 config
1 show history
Configuration command history:
4 interface vlan 1
3 exit
2 interface vlan 1
1 end
Console#
Console#!2
Console#config
Console(config)#