Sunfire B1600 Switch User Manual


 
Chapter 4 Command-Line Reference 4-37
Related Commands
show logging (4-37)
4.3.3.10 show logging
Use this command to display the current logging configuration, along with any
system and event messages stored in memory.
Syntax
show logging {flash | ram}
flash Event history stored in Flash memory (permanent memory).
ram Event history stored in temporary RAM (memory flushed on power
reset).
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command shows the following information:
Syslog logging Whether or not system logging has been enabled using the
logging on command.
History logging in FLASH/RAM The message level(s) that are reported based
on the logging history command.
Any system and event messages stored in memory.