Filter
Top Products
3-46 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
MIB Variables Associated With GVRP
3.3.1.3 Configuring VLANs
When configuring VLANs using the web interface or CLI, the following parameters
are displayed or can be configured:
■ ID – The ID of configured VLAN (1 to 4094).
■ Name – The name of the VLAN (1 to 15 characters).
■ Status – The current operational state of the VLAN.
■ Enable (Active
9
) – The VLAN is active.
■ Disable (Suspend
9
) – The VLAN is suspended; that is, it does not pass packets.
■ Creation Type – The method by which the VLAN was added to the switch.
■ Dynamic GVRP (Dynamic
9
): Automatically learned through GVRP.
■ Permanent (Static
9
): Manually configured as a static entry.
■ Ports / Channel groups
9
– The interfaces that are members of the VLAN.
Web Interface: Configuring VLANs
To create a new VLAN, follow these steps:
1. Open Switch Config
⇒ VLANs.
2. Type the new VLAN ID and name.
3. Set the status to Enabled or Disabled.
4. Click Add.
To modify existing VLANs:
1. Select one or more entries.
TABLE 3-12 MIB Variables Associated With GVRP
Field Name MIB Variable Access Value Range
Default
Value
GVRP Status MIB-II.
dot1dBridge.
qBridgeMIB.
qBridgeMIBObjects
.
dot1qBase.
dot1qGvrpStatus
Read/write enabled (1),
disabled (2)
disabled
9. CLIdisplaystheseterms.