Chapter 4 Command-Line Reference 4-145
count - The maximum number of queries issued for which there has been no
response before the querier takes action to drop a client from the multicast
group. (Range: 2-10)
Default Setting
2 times
Command Mode
Global Configuration
Command Usage
The query count defines how long the querier waits for a response from a
multicast client before taking action. If a querier has sent a number of queries
defined by this command, but a client has not responded, a countdown timer is
started using the time defined by ip igmp snooping query-max-response-
time. If the countdown finishes, and the client still has not responded, then that
client is considered to have left the multicast group.
Example
The following shows how to configure the query count to 10:
Related Commands
ip igmp snooping query-max-response-time (4-146)
4.3.14.8 ip igmp snooping query-interval
Use this command to configure the snooping query interval. Use the no form to
restore the default.
Console(config)#ip igmp snooping query-count 10
Console(config)#