Filter
Top Products
4-112 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Example
4.3.11.8 spanning-tree transmission-limit
Use this command to configure the minimum interval between the transmission of
consecutive RSTP BPDUs. Use the no form to restore the default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count – The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
4.3.11.9 spanning-tree cost
Use this command to configure the spanning tree path cost for the specified
interface. Use the no form to restore the default.
Console(config)#spanning-tree pathcost method long
Console(config)#
Console(config)#spanning-tree transmission-limit 4
Console(config)#