Filter
Top Products
Chapter 4 Command-Line Reference 4-95
Example
4.3.8.11 show interfaces counters
Use this command to display statistics for an interface.
Syntax
show interfaces counters [interface]
interface
■ ethernet port-name
port-name - down link: SNP0-15; up link: NETP0-7; mgt: NETMGT
■ port-channel channel-id (Range: 1-6)
Default Setting
Shows counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Console#show interfaces status ethernet SNP11
Information of SNP11
Basic information:
Port type: 1000SX
Mac address: 00-00-e8-00-00-0a
Configuration:
Name: Blade Slot 11
Port admin status: Up
Speed-duplex: Auto
Capabilities: 1000full,
Broadcast storm status: Enabled
Broadcast storm limit: 256 packets/second
Flow control status: Enabled
Lacp status: Disabled
Current status:
Link status: Down
Operation speed-duplex: 1000full
Flow control type: Dot3X
Console#