Sunfire B1600 Switch User Manual


 
4-38 Sun Fire B1600 Blade System Chassis Switch Administration Guide June 2003
Example
The following example shows that system logging is enabled, the message level
for Flash memory is errors (default level 3 to 0), the message level for RAM is
debugging (default level 7 to 0), and lists one sample error.
Related Commands
logging on (4-34)
logging history (4-35)
4.3.3.11 show startup-config
Use this command to display the configuration file stored in non-volatile memory
that is used to start up the system.
Default Setting
None
Command Mode
Privileged Exec
Console#show logging flash
Syslog logging: Enable
History logging in FLASH: level errors
[0] 0:0:5 1/1/1
"PRI_MGR_InitDefault function fails."
level: 3, module: 13, function: 0, and event no.: 0
Console#show logging ram
Syslog logging: Enable
History logging in RAM: level debugging
[0] 0:0:5 1/1/1
"PRI_MGR_InitDefault function fails."
level: 3, module: 13, function: 0, and event no.: 0
Console#