Filter
Top Products
4-140 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Example
The following example enables IGMP snooping.
4.3.14.2 ip igmp snooping vlan static
Use this command to add a port to a multicast group. Use the no form to remove the
port.
Syntax
ip igmp snooping vlan vlan-id static ip-address interface
no ip igmp snooping vlan vlan-id static ip-address interface
■ vlan-id - VLAN ID (Range: 1-4094)
■ ip-address - IP address for multicast group
■ interface
ethernet port-name
port-name - down link: SNP0-15; up link: NETP0-7; mgt: NETMGT
port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Global Configuration
Console(config)#ip igmp snooping
Console(config)#