Sunfire B1600 Switch User Manual


 
Chapter 4 Command-Line Reference 4-29
Example
4.3.3.2 username
Use this command to add named users, require authentication at login, specify or
change a user's password (or specify that no password is required), or specify or
change a user's access level. Use the no form to remove a user name.
Syntax
username name {access-level level | nopassword | password {0 | 7}
password}
no username name
name The name of the user.
(Maximum length: 8 characters; maximum number of users: 5)
access-level level Specifies the user level.
The device has two predefined privilege levels: 0: Normal Exec, 15: Privileged
Exec. (Levels 1-14 are not used.)
nopassword No password is required for this user to log in.
{0 | 7}–0 means input plain password, 7 means input encrypted password.
password password The authentication password for the user.
(Maximum length: 8 characters plain text, 32 encrypted, case sensitive)
Default Setting
The default access level is Normal Exec.
The default passwords are guest in Normal Exec mode, and admin in
Privileged Exec mode.
Factory defaults for the user names and passwords are:
Console(config)#hostname Server_Chassis_35
Console(config)#
TABLE 4-7 Default User Names and Passwords
username access-level password
guest
admin
0
15
guest
admin