Chapter 4 Command-Line Reference 4-121
4.3.12.1 vlan database
Use this command to enter VLAN database mode. All commands in this mode will
take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
■ Use the VLAN database command mode to add, change, and delete VLANs.
After finishing configuration changes, you can display the VLAN settings by
entering the show vlan command.
■ Use the interface vlan command mode to define the port membership
mode and add or remove ports from a VLAN. The results of these commands
are written to the running-configuration file, and you can display this file by
entering the show running-config command.
Example
Related Commands
show vlan (4-130)
4.3.12.2 vlan
Use this command to configure a VLAN. Use the no form to restore the default
settings or delete a VLAN.
Console(config)#vlan database
Console(config-vlan)#