Filter
Top Products
4-146 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Syntax
ip igmp snooping query-interval seconds
no ip igmp snooping query-interval
seconds – The frequency at which the switch sends IGMP host-query messages.
(Range: 60-125)
Default Setting
125 seconds
Command Mode
Global Configuration
Example
The following shows how to configure the query interval to 100 seconds:
4.3.14.9 ip igmp snooping query-max-response-time
Use this command to configure the snooping report delay. Use the no form of this
command to restore the default.
Syntax
ip igmp snooping query-max-response-time seconds
no ip igmp snooping query-max-response-time
seconds – The report delay advertised in IGMP queries. (Range: 5-25)
Default Setting
10 seconds
Console(config)#ip igmp snooping query-interval 100
Console(config)#