Filter
Top Products
4-28 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
4.3.3.1 hostname
Use this command to specify or modify the host name for this device. Use the no
form to restore the default host name.
Syntax
hostname name
no hostname
name – The name of this host. The maximum length is 255 characters.
Default Setting
None
Command Mode
Global Configuration
System Status Commands
show startup-
config
Displays the contents of the configuration file (stored
in Flash memory) that is used to start up the system
PE 4-38
show running-
config
Displays the configuration data currently in use PE 4-40
show system Displays system information NE,
PE
4-42
show users Shows all active console and Telnet sessions, including
user name, idle time, and IP address of Telnet clients
NE,
PE
4-44
show version Displays version information for the system NE,
PE
4-44
TABLE 4-6 System Management Commands (Continued)
Command Function Mode Page