Filter
Top Products
4-2 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
4.1 Using the Command-Line Interface
4.1.1 Accessing the CLI
When accessing the management interface for the switch over a direct connection to
the switch’s console port, or through a Telnet connection, the switch can be managed
by entering command keywords and parameters at the prompt. Using the switch's
command-line interface (CLI) is very similar to entering commands on a UNIX
system.
4.1.1.1 Console Connection
To access the switch through the console port, perform these steps:
1. At the console prompt, type the user name and password.
The default user names are admin and guest with corresponding passwords of
admin and guest. When the administrator user name and password is entered, the
CLI displays the Console# prompt and enters privileged access mode (Privileged
Exec). But when the guest user name and password is entered, the CLI displays the
Console> prompt and enters normal access mode (Normal Exec).
2. Type the necessary commands to complete your desired tasks.
3. When finished, exit the session with the quit or exit command.
After connecting to the system through the console port, the login screen displays:
User Access Verification
Username: admin
Password:
CLI session with the Sun Fire B1600 is opened.
To end the CLI session, enter [Exit].
Console#