Filter
Top Products
3-60 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
When specifying interfaces connected to multicast routers through the web interface
or CLI, the following parameters are displayed or can be configured:
■ All known ports in VLAN connected to multicast routers:
■ VLAN – The VLAN on the switch.
(The pull-down menu includes the VLAN ID and name.)
■ Interface – The interfaces connected to a multicast router and the whether the
assignment was static (Static) or dynamic (IGMP).
■ Ports in the VLAN statically connected to multicast routers:
■ Available Ports – The interfaces that have not been assigned to the selected
VLAN as multicast router ports.
■ Current Static Ports – The interfaces that have already been assigned to the
selected VLAN as multicast router ports.
Web Interface: Specifying Interfaces Connected to Multicast Routers
1. Open Switch Config ⇒ Broadcast & Multicas ⇒ Multicast Router Ports.
2. Select a VLAN.
3. Click Query to display all the interfaces in the VLAN that are connected to
multicast routers.
4. From the Available Ports, select an interface that is connected to a multicast router
5. Click Add.
6. From Current Static Ports, select an interface that is no longer connected to a
multicast router.
7. Click Remove.