4-142 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Example
The following configures the switch to use IGMP Version 1:
4.3.14.4 show ip igmp snooping
Use this command to show the IGMP snooping configuration.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Configuring IGMP Snooping Parameters” on page 3-55 for a description of
the displayed items.
Example
The following shows the current IGMP snooping configuration:
Console(config)#ip igmp snooping version 1
Console(config)#
Console#show ip igmp snooping
Service status: Enabled
Querier status: Enabled
Query count: 2
Query interval: 125 sec
Query max response time: 10 sec
Query time-out: 300 sec
IGMP snooping version: Version 2
Console#