Filter
Top Products
Chapter 3 General Management of the Switch 3-79
FIGURE 3-25 The Switch Config ⇒ Class of Service
Command-line Interface: Configuring Class of Service
This example assigns a default priority of 5 to port NETP1.
Console(config)#interface ethernet NETP1
Console(config-if)#switchport priority default 5
Console#show interfaces switchport ethernet NETP1
Information of NETP1
Broadcast threshold: Enabled, 256 packets/second
Lacp status: Disabled
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 5
Gvrp status: Enabled
Allowed Vlan: 1(u),
Forbidden Vlan:
Console#