Filter
Top Products
Chapter 3 General Management of the Switch 3-105
3.4.2.2 Command-line Interface: Configuring Interface Connections
Select the interface, and then enter the required settings.
3.4.2.3 MIB Variables Inspecting or Configuring Interface
Connections
Console#Console(config)#interface ethernet NETP1
Console(config-if)#description RD SW#17
Console(config-if)#shutdown
.
.
.
Console(config-if)#no shutdown
Console(config-if)#negotiation
Console(config-if)#capabilities 1000full
Console(config-if)#capabilities 1000full
Console(config-if)#capabilities flowcontrol
.
.
.
Console(config-if)#no negotiation
Console(config-if)#speed-duplex 100half
Console(config-if)#flowcontrol
Console(config-if)#
TABLE 3-33 MIB Variables for Interface Connections
Field Name MIB Variable Access Value Range
Default
Value
Port Name sun...
portMgt.
portTable.portEnt
ry.
portName
Read/write Display String
((Size (0-64))
page
3-102
Administrative
Status
MIB-II.
interfaces.
ifTable.ifEntry.
ifAdminStatus
Read/write up (1),
down (2),
testing (3)
up
Port Auto-
negotiation
sun...
portMgt.
portTable.portEnt
ry.
portAutonegotiati
on
Read/write enabled(1),
disabled(2)
enabled