Filter
Top Products
Chapter 3 General Management of the Switch 3-91
FIGURE 3-30 The Switch Config ⇒ Class of Service Window for Mapping DSCP to COS
Values
Command-line Interface: Mapping DSCP Priority
The following example maps DSCP value 0 to COS value 1 on port SNP5
16
, and then
displays all the DSCP Priority settings for that port.
16.Mappingspecificvaluesfor IPDSCP isimplemented asan interfaceconfigurationcommand,butany
changeswillapplytotheallinterfacesontheswitch.
Console(config)#interface ethernet SNP5
Console(config-if)#map ip dscp 0 cos 1
Console(config-if)#end
Console#show map ip dscp ethernet SNP5
DSCP mapping status: disabled
Port DSCP COS
----------- ---- ---
SNP1 0 1
SNP1 1 0
SNP1 2 0
SNP1 3 0
.
.
.
SNP1 61 0
SNP1 62 0
SNP1 63 0
Console#