Filter
Top Products
DEFINING A JOB DEFINING PRODUCTION JOBS
Page 7-4 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Defining a job
Before you can create a job, you will need to define:
• The paper See “Defining paper characteristics” on page 7..
• The application See “Defining applications” on page 12..
Note: To define a job you must have the User status of Key
Operator or higher.
A job definition determines the previously defined characteristics for the
paper and application that will be used to run a job.
The Default job configuration is as follows:
• Paper pull-down list - Default
• Application pull-down list - Default
Refer to the appropriate sections for the default values of these items.
Creating or amending a job
This procedure assumes that the Paper and Application definitions have
already been made. If you are starting a new job with new resources,
these items need to be created first.
Note: The original settings are those saved for the job; they are not the
same as the default settings. An asterisk (*) is displayed to the right of
the Job pull-down list for any modification made to these settings.
To create or amend a job:
1. Select the Definitions tab, then the Job tab.
The Job screen groups the Paper and Application screen settings
associated with a normal job.