Filter
Top Products
CALIBRATING THE TOUCH SCREEN PERFORMING ROUTINE MAINTENANCE
Page 8-30 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Calibrating the touch screen
Screen calibration is provided to align the screen cursor with the position
that you press. This needs to be carried out whenever the cursor does
not line up with your finger when you touch the screen.
To calibrate the touch screen:
1. Press the Tools tab, then the Screen tab.
2. Press the Calibrate button.
The screen is cleared and a target is displayed in the upper left,
lower right, and upper right of the screen, in this order.
3. Follow the instructions on the screen.
The user interface will automatically redisplay after 30 seconds if you
do not touch it.