Filter
Top Products
RUNNING PRODUCTION JOBS RUNNING JOBS
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 4-3
Running jobs
1. Select the Production tab.
The Production screen is displayed. This is the normal screen when
printing and will be the opening screen. The facilities on this tab are
available to all users.
Note: The Notebook area in the illustration shown below has been
unlocked by the Key Operator enabling Operator level users to
adjust a number of items relating to the job to be run. See “Changing
the notebook settings” on page 4-6.. When the notebook is
unlocked, the bottom right corner is turned over as shown in the
illustration below.
The screen shows a number of indicators and settings used for
printing.
From this screen you can call up a pre-defined job configuration,
select and enable the attachment for the job and choose the
appropriate print line. You can also modify the job configuration to
use a different pre-defined paper or application.
The components of the screen are:
• Job pull-down list - this is used to choose the name of the job
previously defined under the Definitions>Job tab. An asterisk
(*) is displayed to the right of the job name for any modification
made to the job definition. An 'x' is displayed to the left of the
appropriate selection for any modification to the Paper, or
Job List
Paper List
Application List
Line List
Attachment List
Online
Button
Reverse
Notebook Area See “Changing the notebook settings” on page 4-6.
Printer Diagram
High Print
Duplex
Printing
Box
Coverage Ratio
box
Data Lamp
Pages Lamp
Check Output
value
Check
Output
Enable
Button
Print
Line