Filter
Top Products
OPERATOR PANELS PRODUCT OVERVIEW
Page 2-32 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Stacker panel
The stacker panel is at the top of the stacker. Open the right stacker door
on the front of the printer to use the stacker panel.
The components are shown in the following table:
Name Function
Printer Start switch This has the same function as the Start button on the touch screen (see page 26).
Printer Stop switch This has the same function as the Stop button on the touch screen (see page 26).
Printer Reset
switch
This has the same function as the Reset button on the touch screen (see page 26).
Table Auto switch Automatically lifts the table to the height suitable for paper folding. Then the paper guide
moves to the set level. If this is operated when printing, an error will occur.
When the paper output selector lever does not have the stacker selected, it is disabled.
Table Stop switch Stops lifting or lowering the stacker table. If this is operated when printing, an error will
occur.
When the paper output selector lever does not have the stacker selected, it is disabled.
Table Down switch Lowers the stacker table. The paper guide opens to the specified position and stops. If this
is operated when printing, an error will occur.
When the paper output selector lever does not have the stacker selected, it is disabled.
Paper output selec-
tor lever
Used to select whether the paper will be output to the stacker or to another post-process-
ing device.
Stacker Panel
Paper tension
lever
Paper output
selector lever