Filter
Top Products
REMOVING PAPER PAPER PATH
Page 5-12 Xerox 495 Continuous Feed Duplex Printer Operator Guide
Removing Paper
1. To completely remove the paper, cut it at the hopper (see "Cutting
paper" on page 5-11).
2. Press the Eject button located on the touch screen action bar.
3. Press the Stacker Down button on the stacker control panel.
The table stops at the paper removal position.
4. Pull down and fold the paper.
5. Pull the stacker table out using the handles.
6. Remove the paper from the table, push the table back into the
original position, and place the remaining paper along the right side
of the stacker table.
7. Set the table switch to Auto.
8. Adjust the paper forming on the stacker table so that the table will
reach high enough.
Guide
Table