DEFINING PRODUCTION JOBS DEFINING THE ATTACHMENT
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 7-29
3. Press the Physical Port radio button corresponding to the system to
which your printer is attached. This is Channel A or Channel B.
4. Select the required Emulation from the pull-down list.
The current emulation is IPDS.
5. Press the Channel Address field.
A dialog box opens up.
6. Enter the physical address of the channel to which your printer is
connected (from 00 to FF in hexadecimal) on the keyboard.
7. Press .
8. Select the Transfer Mode from the pull-down list. The current
available transfer modes are:
• Low Speed
• High Speed
• Data Streaming 1.1
• Data Streaming 1.5
• Data Streaming 3.0
• Data Streaming 4.5
9. Press the button to save the current line attachment.
The Save screen containing the list of existing attachments is
displayed.
10. For a new attachment, select the Write As field, enter a name for the