Filter
Top Products
DEFINING A PAPER PATH DEFINING PRODUCTION JOBS
Page 7-22 Xerox 495 Continuous Feed Duplex Printer Operator Guide
4. Press on the device icon and, keeping your finger on the screen,
drag it to the line representation being created.
The added device interlocks with the existing devices in the position
chosen.
Note: You can only add the device to the appropriate end of the
printer.
To delete an item from the line, drag the item from the line. The
representation changes to a waste bin.
Drag the item to the waste bin to remove it from the line.
5. Enter the eject distance between devices, press the distance arrow
and enter the new value through the keyboard.
To determine the eject distances:
a. Load perforated paper on the entire print line.
b. For each device, count the number of sheets between devices.
c. Multiply this number by the distance between perforations.
d. When calculating the distance between the printer engines, add
a further 36 inches (914mm).
e. This is the distance to enter.
6. Check the Reverse Duplex Printing box if it is necessary to print
the back on the first marking unit and the front on the second (see
"Front and back marking units" on page 2-2).
7. If you are using a post-processing device that requires processing
marks to be printed (a cutter for example), choose the appropriate
marks from the Marks pull-down list. See “Defining processing
marks” on page 24. for details of how to create processing marks.